Collections

Colour

Additional EN Norm Test	

Certification

Certification PPE

Closure

Coating type

Cut protection level

Environment of use

Fitting Shoes

Flame resistant collection

Function

Hi-vis co-certification

Hi-vis classification

Hood

Lining

Material

Sustainability Label

Nail Penetration

Outsole Material

Palm material 

Safety Rating

Shoe Collection

Shoe Type

Toe Cap

Type of garment

Type of jacket

Type of work

Upper Material

Gender

Laundry

Size

Automatskapas utefter position 13+ i ett artikelnummer

Recommended Usage

NEW!

Flame retardant fabric. High proportion of cotton provides clothes that are comfortable to wear. Certified  EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11612. 

Quality 1512 is an inherent fabric which means that the flame resistant is built into the fibers. It is durable, light and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Quality 1516 is a flame resistant fabric, carefully chosen to create the best combination of strength and comfort. High proportion of cotton provides clothes that are comfortable to wear. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Flame resistant fabric, heavy duty and flexible, for welding class 2, PFAS free.  Certifications:  EN ISO 11611, EN ISO 11612, EN 1149, EN 61482-1-1, EN 61482-1-2, EN 13034, EN ISO 20471, RIS-3279-TOM

Inherently flame resistant material that is wind and waterproof with breathability. The material is certified according to: EN ISO 11611, EN ISO 11612, EN ISO 1149, EN 61482-1-2, EN 61482-1-1, EN ISO 20471, EN 13034, EN 343.

Quality 1532 is an inherent fabric which means that the flame resistance is built into the fibers. Wind-, and waterproofed with breathable function. Certified according to EN 1149-5, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN 343, EN ISO 20471. 

Elasticised welding hat, available in four sizes. The hat protects against dirt and can readily be worn under a welding helmet. Also excellent corporate profiling potential. 
Certified to EN ISO 14116, EN 1149-5.

Welding cap

Metal-free craftsman trousers for use in areas that require flexibility and good protection. The trousers offer high comfort and sewn-on holster pockets. Raised rear waist section with elastic in the sides for enhanced comfort. Bellowed leg pockets, the left with an ID card holder, and two back pockets with press studs. 
Pre-bent knees with external knee pockets that open from below. Ankle width adjusts with press studs. Heat-applied reflective details on the back of the legs and on leg pockets. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles. 
Certified to EN 1149-5, EN ISO 11612, EN 61482-2.

Craftsman Inherent Trousers

Flame resistant, long-lasting work trousers with a good fit. These oil, dirt and water-repellent trousers have functional details throughout, for example bent legs and reflective details at the bottom and spacious handling pockets with many functions. Internal knee pad pockets increase comfort when working on your knees. 
Certified to EN 14404, EN 1149-5, EN ISO 11612, IEC 61482-2. ATPV: 16,0 cal/cm².

Flame resistant craftsman trousers

Flame-resistant welding trousers with hi-vis details for increased visibility. The trousers have smart pocket solutions such as side pockets, ruler pocket and external kneepad pockets. Approved for industrial laundering. 
Certified to EN 1149 – antistatic protection, EN ISO 11611 – protection for welding and similar processes, EN 13034 – protection against liquid chemical splashes, EN ISO 11612 – protection against heat and flame, IEC 61482-2 – protection against thermal hazards of an electric arc, EN 14404 – protection for work in a kneeling position, OEKO-TEX® Standard 100 – tested for harmful substances.

Welding Trousers

Flame resistant trousers that are oil, dirt and water-repellent. These durable trousers have practical and helpful pockets with lids and also outer knee pad pockets. Tested for industrial washing. 
Certified according to EN 14404, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 11612, IEC 61482-2. ATPV: 16,0 cal/cm².

Flame resistant trousers

Oil, dirt and water-repellent flame resistant jacket with robust hidden one-way metal zipper and practical pockets. Bellowed back panel and pre-bent elbows for improved comfort. Reflective details for increased visibility. Industrially washable. 
The fabric has an arc rating of EN 61482-1-1 ATPV 16,0 cal/cm². 
Certified according to EN 1149-5, EN ISO 11611, EN 13034, EN ISO 11612, IEC 61482-2. ATPV: 16,0 cal/cm².

Flame resistant Jacket

Flame-resistant welding jacket with hi-vis details for increased visibility. It has a good fit with pre-bent sleeves and adjustable cuffs with press buttons. Approved for industrial laundering. 
Certified to EN 1149 – antistatic protection, EN ISO 11611 – protection for welding and similar processes, EN 13034 – protection against liquid chemical splashes, EN ISO 11612 – protection against heat and flame, IEC 61482-2 – protection against thermal hazards of an electric arc, OEKO-TEX® Standard 100 – tested for harmful substances.

Welding Jacket

Dirt and water-repellent work trousers in women’s fit with high comfort for you who work in exposed environments. Equipped with smart details such as stretch panels for increased mobility and flexibility. The fabric is inherent with high durability. 
CORDURA®/Kevlar®/Protal® reinforcement on knee. Ruler and knife pocket and leg pocket with space for a telephone. Especially well suited for, for example, electricians and similar professional categories. 
Certified according to EN 14404, EN 1149-5, EN ISO 20471, EN ISO 11612, IEC 61482-2.  Elim 9,2 cal / cm² (applies to the stretch material).  EN 14404: 2004 + A1: 2010 together with knee pads 4027 and 4057.

Women's Trousers Multinorm Inherent Stretch

A boot made especially for work with asphalt. It´s made of strong, durable leather with a smooth outsole made of nitrile rubber that can manage temperatures up to 300°C. Inside the sole, there is a heat-protective foil, and the nail penetration is made of soft textile. 
The insole, with anatomical support, is made of a smooth PU material covered with a textile surface with good moisture absorption. 
The Freelock function, covered with a leather tongue, fastened by two velcro straps, makes it easy to jump in and out of the shoes. Women’s last in sizes 35-39.

ELITE Safety Boot Asphalt S2PL

Flame-resistant and metal-free winter parka, all you need and more in tough weather conditions. This oil, dirt and water-repellent hi-vis class 3 parka is ideal if you work in exposed flame environments. Shields you against the cold, wind and rain with its heat insulated lining, laminated fabric and taped seams. 
The parka has handwarmer pockets on both sides, chest pockets big enough for a mini tablet, and inside pockets with zips. Internally adjustable at the waist, and the sleeves can be adjusted using Velcro. Two-way zip, wristlets at sleeve ends and cut transfer reflector tape. 
With this parka, you can tackle any job in wintertime. The button-on helmet-fitted hood 2167 is sold separately. 
Certified to IEC 61482-2 : APC 2, ELIM 33 cal/cm² and ATPV 39 cal/cm².  EN 1149, EN ISO 11612, EN ISO 11611, EN 13034 and EN ISO 20471.  EN 343 4/1 – Water column rating: 12,000 mm.  EN 342 together with model 1817 – CLO rating 2.19, Icler 0.339 m² K/W.

Winter Parka Multinorm Inherent

The ultimate flame resistant winter jacket from Blåkläder, with a women’s cut. The ideal choice if you work in exposed flame environments, this jack- et also readily shields you against cold, wind and rain with its warm lining, laminated fabric and taped seams. 
A completely metal free garment with cut transfer reflector tape and reflective details on the shoulders ensuring visibility in every direction, cozy fleece inside the pockets and a two-way plastic zip. 
This oil, dirt and water-repellent jacket can overcome any weather challenges, so that you can tackle any job. Helmet-fitted hood 2167 sold separately. The jacket is also available in a men’s model 4517. 
Certified to IEC 61482-2 : APC 2, ELIM 33 cal/cm² and ATPV 39 cal/cm².  EN 1149, EN ISO 11612, EN ISO 11611, EN 13034 and EN ISO 20471.  EN 343 4/1 – Water column rating: 12,000 mm.  EN 342 together with model 1817 – CLO rating 2.19, Icler 0.326 m² K/W.

Women's Winter Jacket Multinorm Inherent

The ultimate flame retardant winter jacket from Blåkläder. The ideal choice if you work in exposed flame environments, this jacket also readily shields you against cold, wind and rain with its warm lining, laminated fabric and taped seams. 
A completely metal free garment with cut transfer reflector tape and reflective details on the shoulders ensuring visibility in every direction, cozy thermal fleece inside the pockets and a two-way plastic zip. 
This oil, dirt and water-repellent jacket can overcome any climate challenge, so you can tackle any job. Helmet-fitted hood 2167 sold separately. The jacket is also available in a women’s model 4917. 
Certified to IEC 61482-2 : APC 2, ELIM 33 cal/cm² and ATPV 39 cal/cm². EN 1149, EN ISO 11612, EN ISO 11611, EN 13034 and EN ISO 20471. EN 343 4/1 – Water column rating: 12,000 mm. EN 342 together with model 1817 – CLO rating 2.19, Icler 0.339 m² K/W.

Winter Jacket Multinorm Inherent

Thin and very flexible shell jacket whose material is inherently flame retardant. This wind and waterproof shell jacket, free of polyester and metal, is a highly sought-after product that is now becoming Blåkläder's first in the genre, and it comes with our tangible sense of quality. 
The jacket is equipped with soft and compliant transfer reflectors, has good breathability and dark areas in exposed areas. The jacket is equipped with loops on the chest to attaching gas detectors and oxygen meters. The slightly higher and adjustable hood can be adapted to have a helmet underneath. 
Certified according to EN 1149-5, EN 13034. EN ISO 20471. EN 343. EN ISO 11611. EN ISO 11612. IEC 61482-2.

Shell Jacket Multinorm Inherent

Thin and very flexible shell jacket in a women’s fit made from inherently flame-resistant material. This wind and waterproof shell jacket with taped seams, non-polyester and non-metal, is a highly sought-after product. The jacket is equipped with soft and flexible reflective transfers and has good breathability and dark colours in areas prone to dirt. 
The jacket is equipped with loops on the chest for attaching technical equipment such as microphones, gas detectors or oxygen meters. The slightly higher, adjustable hood can be adjusted to go over a helmet without reducing your field of vision. 
The shell jacket has a chest pocket with ID card holder, Napoleon pocket with room for a small tablet, two stomach pockets with zippers and an ID card holder in one of the pockets. Also available in a men’s model 4088. 
Certified to EN 1149-5, EN 13034, EN ISO 20471. EN 343. EN ISO 11611. EN ISO 11612. IEC 61482-2. ATPV: 21 cal/cm², ELIM: 19 cal/cm².

Women’s Shell Jacket Multinorm Inherent

High-quality and shell trousers in high vis that are inherently flame-retardant. The oil, dirt and water-repellent trousers, which can be used as a layer on layer garment, are both wind and waterproof with taped seams, making it possible to work in them without any problems in all kinds of weather-exposed environments. 
The braces are removable and can be adjusted as needed. The material of the shell trousers is thin, very flexible and free of polyester. The trousers have a raised back, ruler pocket, leg pockets and knee protection pockets with CORDURA®/Kevlar®/Protal®-reinforcement. 
Certified according to EN 1149-5, EN 14404, EN 13034. EN ISO 20471. EN 343. EN ISO 11611. EN ISO 11612. IEC 61482-2.