Gender

Colour

Certification

Collections

Function

High vis co-certification

High vis classification

Hood

Lining

Material

Sustainability Label

Type of garment

Laundry

Size

Automatskapas utefter position 13+ i ett artikelnummer

NEW!

Fluorescent cloth which is both flexible and hard wearing.

2-layer ripstop fabric with fleece inside, wind- and water repellent.

Lightweight 3-layer softshell fabric with 4-way stretch. Wind- and waterproof, breathable.

Inherent flame resistant and polyester free material with laminate and a soft inside made of fleece. Wind- and waterproof. The material is certified accordning to: EN ISO 11611, EN ISO 11612, EN 1149-5, EN 61482-1-2, EN ISO 20471, EN 13034, EN 343

Quality 1512 is an inherent fabric which means that the flame resistant is built into the fibers. It is durable, light and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Lighter fabric for added comfort. Ideal for promotional/service use, but also useful for light craftsman work, indoors or in a warm climate. 

Softshell type 3-ply fabric. Wind- and waterproof fabric with breathable function.

Light fabric for comfort in warm climate.

Lightweight, water-repellent and durable fabric that protects you from dirt.

Heavy duty dobby. One of our most durable qualities.

3-layer fleece which is wind- and waterproof with breathable function. Fluorescent colors are certified according to EN ISO 20471 (safety clothing with good visibility).

Modern craftsman waistcoat with many practical pockets for tools and accessories. Detachable nail pockets and waist strap to reduce shoulder and neck strain. 
It even has double zippers at the front to adjust the width, which provides a better fit and improved comfort. Mesh panels that make the waistcoat light and provide good ventilation. 
Certified according to EN ISO 20471, S class 1, M-4XL class 2.

Hi-Vis tool vest

Lightweight, two-tone softshell made from wind-resistant, highly breathable material. The stretch back panel allows for a greater range of movement and improved ventilation. 
For optimal comfort, the vest has an extended back panel, fleece-lined collar and adjustable hem. Suitable for cool, indoor working environments.

Softshell Vest

A lightweight softshell vest that is extremely soft, comfortable and flexible thanks to its material. The vest is two-toned with segmented reflectors, offering optimal visibility and safety when needed most. 
This stylish high-visibility vest combines the light, stretchy feel with the durability required in a work garment. The material is wind- and waterproof with breathability.

Softshell Vest Hi-Vis

Metal- and polyester-free softshell vest in Hi-vis that is inherently flame-resistant. 
The wind and water-resistant vest is made of 3-layer softshell material and has excellent breathability. It also has an extended back that improve the already fantastic comfort. 
The vest is equipped with two gas loops, which are designed to hang gas detectors, oxygen meters or microphones in. It serves excellently as a reinforcement garment in chilly conditions. 
Certified according to EN 1149-5, EN 13034, EN ISO 20471, EN ISO 11611, EN ISO 11612, EN 61482-2 , APC 2 Ebt 33 cal/cm² , ELIM 30 cal/cm²

Multinorm Softshell Vest

Vest with smart heating technology from Clim8® which senses when your body temperature drops and makes sure to warm you up.  The adaptable built-in technology uses a thermostat and computer to keep track of body temperature and regulate the heat in the vest with battery-powered elements. Also the vest is washable, making this garment from Blåkläder and Clim8® an innovative hit! Battery and charger included. Also available in a women’s model 3881.  Important information before washing and embroidery: remove the battery before washing and protect the vest’s connector by covering the cable length with the plastic sleeve attached to the cable. For best results to avoid damaging the heating elements, it is recommended to place the embroidery on the lower part of the back. Personalization can only be done through embroidery and can only be placed on the lower back section. This is to prevent damage to the heating elements

Smart Heated Vest

Flame-retardant tool waistcoat that protects you in demanding conditions. 
The dirt and water-repellent vest features practical pockets for tools and accessories. Reinforced, three-compartment nail pockets at the front, and nail pockets at the front and rear. Tested and approved for 50 washes. 
Certified according to EN 1149-5, EN ISO 20471, EN ISO 11612, IEC 61482-2. ATPV: 11 cal/cm².  Tested to meet the EN ISO 15797 requirements for industrial laundering.

Multinorm Inherent Waistcoat

Modern work waistcoat with many practical pockets for tools and accessories. Detachable nail pockets and waist strap to reduce shoulder and neck strain. 
It even has double zippers at the front to adjust the width, which provides a better fit and greater comfort. Mesh panels with stretch material make the waistcoat light and provide good ventilation.

X1900 Waistcoat

Modern Softshell vest in Hi-Vis colors with a waterproof and breathable fabric. The vest has a high collar and a soft fleece lining. 
Certified according to EN 20471 for improved visibility at work.

Hi-Vis Softshell vest

Thermal-lined winter waistcoat to keep you warm in colder weather. The waistcoat is made from a lightweight material and has CORDURA® Denim reinforcements on the shoulders and a front zipper. 
It has a detachable and adjustable thermal-lined hood. The front pockets are zipped and the inside pockets even include a mobile phone pocket. The winter waistcoat has a long back to keep out the cold.

Winter waistcoat

Warm and comfortable high visibility waistcoat with pile lining suitable for several professions that can be used all year round. The waistcoat shell is water and dirt repellent and has a concealed, sturdy one-way zipper. 
It has several practical zipped pockets and a kangaroo pocket on the back for gloves and the like. For additional comfort, it has a long back and a drawstring hem.

Hi-Vis waistcoat

Distribute weight across the upper body with a hardwearing, garment washed waistcoat. It has two chest pockets, one with flap and phone pocket, and one with pen pocket. 
Two reinforced nail pockets and two screwdriver pockets with flaps.

Waistcoat

High visibility protective vest that keeps your most important tools in reach. 5 cm reflective trim on all sides, so you’re visible from all directions. 
Certified according to EN 471. Class 2.

Hi-Vis Vest

Fleece vest in windproof material with breathable function. The vest has front pockets, inner pockets and has Cordura®-reinforcement on the shoulders and lower part for extra durability. Equipped with reflex details for higher visibility.

Windproof Fleece vest

Vest in a fluorescent fabric that is both hardwearing and flexible. We guarantee up to 25 washes at 85° with retained fluorescence. 
Certified according to EN ISO 20471, Class 2.

Hi-Vis Tool Vest

Quilted vest from Blåkläder's Unite collection which is warmly lined on both torso and back. The sides and shoulder area of the vest are in knitted polyester, which contributes to the garment's excellent mobility and comfort. Good unquilted profiling surfaces. 
Also available in women's model 3864. Personalization can only be done through embroidery