NEW COLOUR!

Flame resistant fabric, heavy but still flexible fabric for hard environments. Certified for welding class 2. The fabric is certified EN 1149-3, EN IEC 61482-1-1, EN 61482-1-2, EN ISO 11611, EN ISO 11612. 

Inherently flame resistant material that is wind and waterproof with breathability. The material is certified according to: EN ISO 11611, EN ISO 11612, EN ISO 1149, EN 61482-1-2, EN 61482-1-1, EN ISO 20471, EN 13034, EN 343.

Quality 1514 is a flame resistant fabric carefully chosen to create the best combination of strength and comfort. High proportion of cotton provides clothes that are comfortable to wear. The fabric is certified for EN 1149-3, EN 61482-1-2, EN  IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Evaluated according to EN ISO 11612, inherent flame protection, elastic.

A knitted material with inherent flame resistant features. It's an interlock that is soft and comfortable to wear. The fabric is certified for EN ISO 20471, EN ISO 11612, EN 1149-3, EN 61482-1-2, EN 61482-1-1.

Comfortable and warm wool quality in a knitted interlock with inherent flame resistant properties. The fabric is certified for EN ISO 11612, EN 1149-3, EN 61482-1-2, EN 61482-1-1.

Comfortable and stretchy rib quality, with inherent flame resistant properties. Fabric is certified for EN 11612 A1, B1, C1, EN 1149-3, EN IEC 61482-1-1 Ebt: 8,2 cal/cm² ELIM: 7,3 cal/cm², EN IEC 61482-1-2, APC 1.

Durable apron that works perfectly when welding or grinding, with special reinforcing fabric that repels molten metal. Protects against iron, zinc and aluminium and is industrially washable. 
Certified according to EN ISO 11611, EN ISO 11612.

Welding apron

A boot made especially for work with asphalt. It´s made of strong, durable leather with a smooth outsole made of nitrile rubber that can manage temperatures up to 300°C. Inside the sole, there is a heat-protective foil, and the nail penetration is made of soft textile. 
The insole, with anatomical support, is made of a smooth PU material covered with a textile surface with good moisture absorption. 
The Freelock function, covered with a leather tongue, fastened by two velcro straps, makes it easy to jump in and out of the shoes. Women’s last in sizes 35-39.

ELITE Safety Boot Asphalt S2PL

A welding boot made of durable leather, with an outsole in nitrile rubber that can withstand temperatures up to 300°C. A foil heat shield is built into the sole construction. The toe cap is made of composite, and the penetration protection plate of a textile material. 
The Freelock solution makes it nice and easy to put the boots on and take them off, and it’s covered and protected by a leather-clad tongue that fastens with Velcro. 
The insole, anatomically designed for optimum comfort, is made of a soft PU material and has a textile upper with good moisture absorption. Women´s last in UK sizes 2-6.

ELITE Safety Boot Welding S3

A shoe made especially for work with asphalt. It´s made of strong, durable leather with a smooth outsole made of nitrile rubber that can manage temperatures up to 300°C. Inside the sole, there is a heat-protective foil, and the nail penetration is made of soft textile. Composite toecap with TPU reinforcement. The insole, with anatomical support, is made of a smooth PU material covered with a textile surface with good moisture absorption. The Freelock function, covered with a leather tongue, fastened by velcro strap, makes it easy to jump in and out of the shoes. Women´s last in UK sizes 2-6.

ELITE Safety Shoe Asphalt S2PL

Flame resistant hood for shell jacket 4053, 4066 and 4446, featuring reflective details for increased visibility. Completely metal-free and attaches with plastic press studs.
<ul>
<li>Size S fits model 4053, 4066 and 4446 in sizes XS–S</li>
<li>Size L fits model 4053, 4066 and 4446 in sizes M–XL</li>
<li>Size 2XL fits model 4053, 4066 and 4446 in sizes 2XL–4XL</li>
</ul>

Hood Inherent

Flame-resistant, helmet-fitted winter hood with heat insulation and reflective details. Multiple adjustments, attaches with plastic press studs.
The oil, dirt and water-repellent hood’s outer fabric is a laminated, inherent material and the lining has a high aramid content. Fits 4517, 4527, 4917 and 6317.

Winter Hood Multinorm Inherent

Flame-resistant and adjustable hood that can be applied to winter parka 4467 or winter jacket 4069 with push buttons. The hood is helmet-fitted, so you can easily wear a helmet under it.

Flame resistant Winter Hood

Stretch belt made from flame resistant material, equipped with a flame resistant plastic buckle embossed with the Blåkläder logo. 
Tested in accordance with EN ISO 11612 – Protection against heat and flame. 
Length: 130 cm.

Flame resistant belt stretch

This flame-resistant hood (balaclava) protects your head, face and neck. Suitable to wear underneath the helmet and gives the wearer good face protection. The garment is certified according to EN 14116 and EN 1149-5. ELIM 8,6 cal/cm².

Balaclava Inherent

Flame resistant and very elastic beanie made of highly certified material. This flexible and thin universal beanie is one size and is especially well suited to wear under a helmet. 
Certified according to EN ISO 14116 and EN 1149-5.

Beanie Inherent

A thin, flexible and inherent flame resistant wool beanie that can be worn under a helmet. It has excellent abilities for providing and retaining heat. 
It is certified according to EN ISO 14116. EN 1149-5.

Wool beanie Inherent

Neck protection with inherent flame retardant in sweatshirt quality. Due to the high demand, Blåkläder has developed this neckline because its double layers at one end protects the neck and face particularly well. 
Can be used both as a hat or neck cover and can be pulled up as a face protection when needed. 
The garment is certified according to EN 14116 index 3, EN 1149-5 and the material has an ELIM-value of 8,6 cal/cm².

Inherent Neck protection

Balaclava which, thanks to its comfortable, flame-resistant material, provides permanent protection against heat, flame and electric arc. Soft stretch material provides high work comfort when working in hazardous environments.  The garment is certified to EN ISO 14116, EN 1149-5. Quality 1764 is tested and approved according to APC 1 and has an ELIM value of 7.3 cal/cm².

Flame resistant sock knitted in high-quality wool with an anti-static function. Reinforcement and insulating wool terry in the heel, sole and toe for increased durability and comfort. 
Thanks to the wool's ability to regulate temperature and keep warm in wet and dry conditions or climates, it is the best material for long-term work outdoors in low temperatures. 
Certified according to EN 1149-5 and EN ISO 14116.

Flame Resistant Wool Sock

Flame resistant tool pockets to fit 1478, 1578, 2608, 2678, 6378, 1869 and 1724. Use with flame resistant belt 4039.

Accessories

Welding apron

ELITE Safety Boot Asphalt S2PL

ELITE Safety Boot Welding S3

ELITE Safety Shoe Asphalt S2PL

Hood Inherent

Winter Hood Multinorm Inherent

Flame resistant Winter Hood

Flame resistant belt stretch

Balaclava Inherent

Beanie Inherent

Wool beanie Inherent

Inherent Neck protection

Balaclava Inherent

Flame Resistant Wool Sock

Flame resistant tool pockets belt fastening