Gender

Colour

Certification

Collections

Flame resistant collection

Function

Hi-vis co-certification

Hi-vis classification

Lining

Material

Sustainability Label

Type of garment

Laundry

Size

Automatskapas utefter position 13+ i ett artikelnummer

NEW!

Inherent flame resistant fabric, good protection level, designed for environments with demands on high-vis orange, with FR polyester, PFAS free. Certifications: EN ISO 11611, EN ISO 11612, EN 1149, EN 61482-1-1, EN 61482-1-2

Quality 1512 is an inherent fabric which means that the flame resistant is built into the fibers. It is durable, light and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Quality 1513 is an inherent fabric which means that the flame resistant properties are built into the fibers. It is durable, light and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471. 

Quality 1519 is an inherent fabric which means that the flame resistance is built into the fibers. It is durable and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Quality 1514 is a flame resistant fabric carefully chosen to create the best combination of strength and comfort. High proportion of cotton provides clothes that are comfortable to wear. The fabric is certified for EN 1149-3, EN 61482-1-2, EN  IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Wind- and waterproof fabric with breathable function.

A durable bib trouser in inherent flame-resistant material with a light lining on the inside. This combination makes the trouser approved for APC 2, the higher protection class for electric arc. Soft and flexible with CORDURA®/Kevlar®/Protal® reinforcement at the knees. 
Equipped with many smart pocket solutions adapted to the certification requirements. Braces with an elastic panel for increased comfort. Exposed pockets are reinforced with double fabric for longer service life. 
Metal-free, PFAS-free and approved for industrial laundering at 60°C. Developed to function safely and reliably in ATEX-classified environments. 
Certified to EN ISO 11611 – protection for welding and similar processes, EN ISO 11612 – protection against heat and flame, EN 1149 – antistatic protection, IEC 61482-2 – protection against thermal hazards of an electric arc, EN 13034 – protection against liquid chemical splashes, EN ISO 20471 – high visibility, EN 14404 – protection for work in a kneeling position, OEKO-TEX® Standard 100 – tested for harmful substances.

APC 2 Multinorm Inherent Bib Trousers

The bib trousers are crafted from inherently flame retardant fabric, which means that the flame retardant properties are naturally present in its fibres. These soft trousers allow for easy movement and the knees are reinforced with a CORDURA®/Kevlar®/Protal® fabric. 
These oil, dirt and water-repellent bib trousers feature many smart pocket solutions designed to meet certification standards. Elasticated braces for enhanced comfort. Pockets subject to excessive wear are reinforced with double thickness to extend their life. Ripstop fabric delivers top-class non-rip durability. All C-sizes can be lengthened to C-150 sizes. Tested and approved for 50 washes. 
The product is certified according to EN 14404, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 20471, EN ISO 11612, IEC 61482-2, ATPV: 11 cal/cm². 
Achieves Class 3 certification when combined with jacket 4089 under the EN ISO 20471 standard. 
Tested to meet the EN ISO 15797 requirements for industrial laundering.

Multinorm Inherent BIB

Crafted from inherently flame retardant fabric, which means that the flame retardant properties are naturally present in its fibres. These soft trousers allow for easy movement and the knees are reinforced with CORDURA®/Kevlar®/Protal® fabric. 
They feature many smart pocket solutions designed to meet certification standards. Elasticated braces for enhanced comfort. Pockets subject to excessive wear are reinforced with double thickness to extend their life. Ripstop fabric delivers exceptional tear strength. All C sizes can be lengthened to C-150 sizes. 
Certified under EN 1149-5, EN 13034 PB [6]. EN ISO 20471, Class 2, Together with art. 4089 XS-S obtains class 3 according to EN ISO 20471. EN ISO 11611, Class 1 A1+A2.  EN ISO 11612 A1, A2, B1, C1, E1, F1. IEC 61482-2, class 1.  ATPV: 11,9 cal/cm², HAF: 79,3%, LOI: 29,6%.

Multinorm inherent BIB

A durable bib trouser in inherent flame-resistant material with flame resistance built into the fibre structure. Soft and flexible with CORDURA®/Kevlar®/Protal® reinforcement at the knees. 
Equipped with many smart pocket solutions adapted to the certification requirements. Braces with an elastic panel for increased comfort. Exposed pockets are reinforced with double fabric for longer service life. 
Metal-free, PFAS-free and approved for industrial laundering at 60°C. Developed to function safely and reliably in ATEX-classified environments. 
Certified to EN ISO 11611 – protection for welding and similar processes, EN ISO 11612 – protection against heat and flame, EN 1149 – antistatic protection, IEC 61482-2 – protection against thermal hazards of an electric arc, EN 13034 – protection against liquid chemical splashes, EN ISO 20471 – high visibility, EN 14404 – protection for work in a kneeling position, OEKO-TEX® Standard 100 – tested for harmful substances.

Multinorm Inherent Bib Trousers

Bib trousers in inherently flame-retardant material, which means that the flame retardant is built into the structure of the fiber. The trousers are soft and flexible and the outer knee protection pockets are reinforced with a material of CORDURA®/Kevlar®/Protal®.
The trousers, which are made of ripstop material with very good resistance to tears, have many smart pocket solutions and elastic braces for even better comfort. For increased durability, exposed pockets are reinforced with double material.
The product is certified according to EN ISO 20471 class 1, EN 1149-5, EN 13034 PB [6], EN ISO 11611 class 1 A1 + A2, EN ISO 11612 A1, A2, B1, C1, E1, F1, IEC 61482-2 APC 1, ATPV: 11.9 cal /cm², HAF: 79.3%, LOI: 29.6%. EN 14404: 2004 + A1: 2010 together with knee pads 4027 and 4057.

Multinorm Inherent Bib trousers

Bib and brace trousers made from inherently flame-resistant material, meaning the flame protection is built into the fibre’s structure. In the lined areas, the trousers are approved for the higher arc protection class—APC 2. The trousers are soft and flexible, with external kneepad pockets reinforced with CORDURA®/Kevlar®/Protal® material. 
These dirt-, and water-repellent trousers feature smart pocket solutions and elastic braces for enhanced comfort. Made from ripstop material with excellent tear strength. 
For increased durability, exposed pockets are reinforced with double layers. Tested and approved for 50 washes. 
Certified according to EN 14404, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 20471, EN ISO 11612, and EN 61482-2 APC 1 (APC 2 in the lined areas).

APC 2 Multinorm Inherent Bib trouser

Flame retardant bib overalls in 1519 quality, an inherent Class E3 fabric specially designed for work in metal industries that deal with molten iron. The Class 1 hi-vis certified bib overalls are designed to protect against splashing from molten metal, and radiant heat.
These oil, dirt and water-repellent trousers with elastic braces have a chest pocket, a left leg pocket with flap, ID card holder, phone pocket, folding rule pocket, knife holder, and back pockets with flaps and press studs. Tested for industrial laundry.
Certified to EN ISO 20471, EN 1149-5, EN13034, EN ISO 11612, EN ISO 11611, IEC 61482-2, EN 14404, ATPV: 14 cal/cm², ELIM: 12 cal/cm².

Inherent Steel Bib trousers

Bib trousers in inherently flame-retardant material, which means that the flame retardant is built into the structure of the fiber. The trousers are soft and flexible and the outer knee protection pockets are reinforced with a material of CORDURA®/Kevlar®/Protal®.
These oil, dirt and water-repellent trousers, which are made of ripstop material with very good resistance to tears, have many smart pocket solutions and elastic braces for even better comfort. For increased durability, exposed pockets are reinforced with double material. Tested and approved for 50 washes.
The product is certified according to EN 14404, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 20471, EN ISO 11612, IEC 61482-2. ATPV: 11 cal/cm², HAF: 79,3%, LOI: 29,6%. EN 14404: 2004 + A1: 2010 together with knee pads 4027 and 4057.

A durable bib trouser in inherent flame-resistant material, which means the flame resistance is built into the fibre structure. The trouser is soft and flexible and the knees are reinforced with CORDURA®/Kevlar®/Protal®. 
It has many smart pocket solutions adapted to the certification requirements. Braces with an elastic panel provide increased comfort. For longer service life, exposed pockets are reinforced with double fabric. 
Metal-free, PFAS-free and approved for industrial laundering at 60°C. Developed to function safely and reliably in ATEX-classified environments. 
Certified to EN ISO 11611 – protection for welding and similar processes, EN ISO 11612 – protection against heat and flame, EN 1149 – antistatic protection, IEC 61482-2 – protection against thermal hazards of an electric arc, EN 13034 – protection against liquid chemical splashes, EN ISO 20471 – high visibility, EN 14404 – protection for work in a kneeling position, OEKO-TEX® Standard 100 – tested for harmful substances.

Bib and brace trousers made from a soft, flexible, and durable material, featuring a thin lining on the front. In the lined areas, the trousers are approved for the higher arc protection class—APC 2. 
Includes a bellows leg pocket with flap, internal ID card holder and mobile phone holder on the left side. Two back pockets with flaps equipped with press studs. This metal-free model uses plastic press studs and zips. 
Certified according to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 APC 1 (APC 2 in the lined areas), and EN 13034.

APC 2 Inherent Bib trousers

Oil, dirt and water-repellent multinorm bib trouser that provides you with maximum protection when working in harsh environments. The garment is made from a durable material and features a comfortable fit with Cordura®/Kevlar®/Protal™-reinforced knee pad pockets. 
Smart pocket solutions and functions such as adjustable elasticated braces, side hammer loop and belt loops, one with a D ring. Industrially washable. Protects against liquid chemicals. 
Certified according to EN 14404, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 20471, EN ISO 11612, IEC 61482-2. ATPV: 11,0 cal/cm².

Multinorm Bib trousers

Bib trousers that give you maximum protection when working in harsh environments. These oil, dirt and water-repellent trousers have a durable material, good fit, and reinforced outside knee protection pockets in Cordura®/Kevlar®/Protal®.
Smart pocket solutions and functions such as adjustable elasticated braces, side hammer loop and belt loops, one of which with D-ring. Tested for industrial washing.
Certified according to EN 14404, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 20471, EN ISO 11612, IEC 61482-2. ATPV: 11,0 cal/cm². EN 14404: 2004 + A1: 2010 together with knee pads 4027 and 4057.

Multinorm Class 1 Bib Trousers

Bib trousers in a soft, comfortable quality offering high durability. The trousers have dirt- and water-repellent properties. Metal free with plastic buttons, zip and buckles.
Adjustable braces with elastic in the back, a button-adjustable waist, belt loops, pre-bent knees and external knee pockets that open from below, as well as ankle width that adjusts with buttons.
Functional pockets including a chest pocket, two front pockets, two back pockets with flaps, and leg pockets with an ID card holder on the left.
Heat-applied reflective details on the back of the legs and on leg pockets. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles.
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 13034, EN 61482-2.

Inherent Bib Trousers

Warm-lined, wind and waterproof winter trousers, Class 2 hi-vis, with taped seams in a tough, durable material. Offers the best possible visibility when you need it most. Exterior knee pad pockets. 
The trousers have openable snow locks at the ankles and detachable braces. You can attach the detachable tool pockets 2170, sold separately. 
To reach different leg lengths, we offer these trousers in 3 lengths. Ex. Size Large: LS=short -4, L=XXcm, LT=Long +4.

Hi-Vis Winter Trousers

Keep warm when the cold bites. Lined trousers in a wind and waterproof material. The trousers are equipped with extended waistband back and zippers on the sides reaching up to the knee, as well as an openable internal snow gaiter. 
Other good features are the detachable, elastic braces and the discreet reflective details on the side of the leg. 
Certified according to EN 342, protective clothing for protection against the cold together with the jackets listed under the "Certifications" tab, and EN 343 – protective clothing against bad weather. Tool pockets sold separately.

APC 2 Multinorm Inherent Bib Trousers

Multinorm Inherent BIB

Multinorm inherent BIB

Multinorm Inherent Bib Trousers

Multinorm Inherent Bib trousers

APC 2 Multinorm Inherent Bib trouser

Inherent Steel Bib trousers

Multinorm Inherent Bib trousers

Multinorm Inherent Bib Trousers

APC 2 Inherent Bib trousers

Multinorm Bib trousers

Multinorm Class 1 Bib Trousers

Inherent Bib Trousers

Hi-Vis Winter Trousers

Winter trousers